Diagnostic Station DS-20 Quick Guide with EMR connectivity and Health-o-meter scale

Diagnostic Station DS-20 Quick Guide with EMR connectivity and Health-o-meter scale

Diagnostic Station DS-20 Quick Guide.
Users can go through these steps to perform vital signs using this guide. The process goes from Querying Patient Data from the EMR to transmitting Vitals to the Patient Chart.

    • Related Articles

    • Diagnostic Station DS20 - Health o Meter

      Connecting the DS20 to the Health o meter scale Unzip contents of the zip file created by Zoe to a blank USB stick – should have: \DockLight (folder - not really needed but can be helpful for troubleshooting) \SiliconLabs CP2120x v 6.3 (folder) ...

    • How to update Schiller Server from 19 to version 23.08.1

      Attached is the instructions to update Schiller Server with mirth channels. Author: Daniel Millar

    • Computer and hard disk specifications of the CS-104 package

      Computer and hard disk specifications CS-104 package Dell Optiplex 7000 Micro 12th generation Intel i5 processor. SSD: M.2-PCIe-NVMe-Solid-State-Drive 2230 with 256 GB, Class 35 RAM: 8GB Cache: 18 MB. Operating System: 64 Bits.

    • Remote EKGs Software update

      To update a CARDIOVIT FT-1 and a CARDIOVIT AT-102 G2 remotely you have to connect the EKG to the power and follow the process below: CARDIOVIT FT-1 Go to HEART/ settings Go to Connectivity / Update server and write 12.17174.162 on the Host field and ...

    • LFX Database Backup

      Attached is the LFX Database back-up